Unrefined Copper Ingots
Unrefined Copper Ingots are produced as a by-product. The material is intended for further processing into anode copper, electrolytic refining and the production of refined copper.
Working Composition Parameters
| Parameter | Working value |
|---|---|
| Cu | min. 98.0% |
| Fe | max. 0.30% |
| S | max. 0.20-0.30% |
| Pb | max. 0.20% |
| Zn | max. 0.30% |
| Ni | max. 0.30% |
| As | max. 0.10% |
| Sb | max. 0.05% |
| Bi | max. 0.01% |
| Sn | max. 0.05% |
| Se | max. 0.05% |
| Te | max. 0.02% |
Form, Packaging and Supply
| Parameter | Information |
|---|---|
| Form | ingots |
| Approximate ingot weight | 20 ± 5 kg |
| Installed capacity | up to 20 tonnes per year |
| Lot size | 5,000-20,000 kg; subject to customer requirements |
| Packaging | on pallets, approximately 1,000 kg net |
| Storage | store in a dry place and protect from moisture |
| Traceability | by batch number |
| HS code | 7402 00 000 |
Quality Control and Documents
Laboratory control may include Cu, Ag, Au, Fe, S, O, Pb, Zn, Ni, As, Sb, Bi, Sn, Se, Te, Co, Cd, Hg, C, Si, Al, Cl and F. The actual analysis of each batch is stated in its Certificate of Analysis.
Details of ALAPMET's quality management system certification are available at /quality/documents.
The information on this website is provided for general technical and commercial reference. The terms of a specific supply, the agreed specification and the documents issued for the relevant batch take precedence. The Certificate of Analysis confirms the actual results for the identified batch.